Top 10 Custom Hang Tags Factory & Supplier

For standard custom cardboard and kraft paper hang tags, our factory direct MOQ starts at just 100 pieces per artwork design, making it accessible for boutique releases and prototyping. For specialized multi-material items such as electroplated zinc alloy tags or custom-molded plastic seal strings, the tooling and mold setup costs generally require an entry point of 500 to 1,000 units.

Paper is hygroscopic and expands or contracts with changes in ambient relative humidity. To prevent curling, we utilize balanced cross-grain lamination techniques (duplexing two plies with opposing grain directions) and apply protective water-based or matte BOPP sealant films. Finished products are vacuum-sealed in desiccated, heavy-gauge polybags prior to export carton packing.

We require vector files provided in Adobe Illustrator (.AI), vector PDF, or EPS formats with all fonts outlined and vector paths converted. The artwork must be configured in the CMYK color space. For precise corporate color fidelity, provide specific Pantone Matching System (PMS) solid coated or uncoated formulas so our technicians can formulate exact ink batches.

Yes. We specialize in laminating UHF RAIN RFID dry or wet inlays (such as Impinj Monza R6 or NXP UCODE series) between two plies of 300 GSM board. This conceals the metallic antenna and chip from visual detection, protecting it from physical friction while ensuring 100% read rates on warehouse automated tollgates and handheld retail readers.

Debossing presses the design down into the paper substrate, creating an indented depression without affecting the reverse side if heavy board is used. Embossing raises the graphic element above the surface using a matched male/female brass die set. Blind finishes refer to pressing without ink or foil, creating a subtle, high-prestige tactile effect celebrated in minimalist fashion.

We inspect every batch using ISO 2859-1 (AQL 1.5 for critical defects, 2.5 for minor cosmetic defects). Tests include Sutherland Rub resistance tests (ASTM D5264) to confirm ink adhesion, eyelet tensile pull tests (verifying a minimum 40N release strength), and cross-hatch tape adhesion tests on hot-stamped metallic foils to guarantee durability.

For delicate, stretch, or high-gauge fabrics, avoid standard plastic kimble barb tagging guns that penetrate and damage the weave. We recommend pre-strung soft mercerized cotton or braided silk ropes fitted with safety pins, copper pear pins, or custom-molded locking seal clips that loop through neck labels, buttonholes, or zipper pulls without piercing the textile.

Physical pre-production counter-sampling requires 4 to 6 business days once digital proofs and custom die-tooling are approved. Bulk production for runs under 50,000 pieces typically finishes in 8 to 12 business days. Expedited air couriers (DHL/FedEx) deliver samples globally within 3 to 5 business days, while volume bulk orders ship via consolidated sea freight (FOB Pakistan).